Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| cupholder_sleeve.stl | Mount / bracket | 413.6 KB STL | Slice file | Slice file | Slice file | Ensure the sleeve's gap is oriented for easy bottle insertion and removal. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla cup holder water bottle sleeve
Shared by
3DPrintedCarPartDescription
I recently got a 2015 Tesla Model S. I always keep bottles of water in my car, and the 500mL bottles I prefer tilt in the Tesla's cup holder. While the concept is trivial (it's a cylinder with a gap), it did take some consideration to make it work well. More detail can be found on my blog. While I made these specifically for the Tesla, they would probably work for any cupholder with about a 79mm diameter opening at the top and 66mm or so depth.
Compatible Cars
Originally published on thingiverse.com by Ron Risley (twoprops) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
