Tesla J1772 Adapter Model S (2015) Trunk Mount - image

Files (1)

Tesla_J1772_Adapter_Trunk_Mount.stl

STL

2.0 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tesla_J1772_Adapter_Trunk_Mount.stl	Mount / bracket	2.0 MB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trim Pieces

Tesla J1772 Adapter Model S (2015) Trunk Mount

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A mount that clips into the trim on the back left side of the Model S trunk. Modeled to clip into the 2015 Model S, it should fit right between 2 ribs in the trim, you can feel underneath the trim to find the position. I'm not sure if this will fit into the trim on the newer model S, if someone wants to send me one to make a mount for, I'd prefer a plaid version please.