Files (2)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| console-bottom.stl | Printable file | 12.1 MB STL | Slice file | Slice file | Slice file | Ensure proper adhesion to the print bed to prevent warping |
| console-top.stl | Printable file | 34.6 MB STL | Slice file | Slice file | Slice file | Ensure proper adhesion to the print bed to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model 3 Center Console Organizer
Shared by
Michael ChenDescription
This is a remix of theworkshop's remix of jonco223's center console design. I stretched the trash can to reach all the way down to the bottom of my console. For the top I added a compartment to hold my charging adapter. I also added credit card sized holders. I use them to hold rfid cards to activate chargers. In the future I may modify the trash compartment to have rounded edges on the bottom for support-less printing. Supports are needed to print the top due to the odd shape. I used supports on the bottom as well, but they may not be necessary depending on your filament and printer.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
