Files (1)

Model_3_Charger_Holder.stl

STL

953.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Model_3_Charger_Holder.stl	Mount / bracket	953.1 KB STL	Slice file	Slice file	Slice file	Ensure the print bed is level and clean for optimal adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Tesla Model 3 Charger Holder

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Tesla charging cable wall mount. This is meant to hold the vehicle plug-in side of the charger when not in use so its not on the ground. Capable of holding most vehicle chargers since the insert is the a little larger than the charging cable diameter, not the plug itself.