Tesla Model 3 Cupholder insert for 36oz YETI - image

Files (3)

cupholder_insert_YETI-V2.stl

STL

1.9 MB

cupholder_insert_YETI-V2.stp

STP

169.6 KB

cupholder_insert_YETI.stl

STL

2.0 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
cupholder_insert_YETI-V2.stl	Mount / bracket	1.9 MB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for better adhesion
cupholder_insert_YETI-V2.stp	Mount / bracket	169.6 KB STP	Slice file	Slice file	Slice file	Ensure a brim or raft is used for better adhesion
cupholder_insert_YETI.stl	Mount / bracket	2.0 MB STL	Slice file	Slice file	Slice file	Ensure a brim or raft is used for better adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Tesla Model 3 Cupholder insert for 36oz YETI

0 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Note: Please forgive the poor image quality. Thingiverse limited my JPGs to 500kb each - not really sure what's going on, so they're heavily compressed. If anyone knows what the story is on that, feel free to leave a comment. --------------------------------------- A cupholder insert to fit your YETI Rambler 36oz bottle. The inside will also fit a regular size soda can. Fits Tesla Model 3 2018-2020 model years; may fit on 2021+, but I can't confirm. V2 has slightly thicker walls for added strength.