Tesla Model 3 Cupholder to Nalgene - image

Files (1)

Tesla_Model_3_Cup_to_Nalgene_taper.stl

STL

175.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tesla_Model_3_Cup_to_Nalgene_taper.stl	Primary model	175.0 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports in the slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Tesla Model 3 Cupholder to Nalgene

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Insert for Tesla Model 3 center console cup holder to hold a 32 oz. Nalgene bottle. The model is slightly tapered from the bottom to the top to fit snugly inside the cup holder and the Nalgene bottle is a snug (but not tight) fit. The bottom of the holder is open to save filament and to not create a suction or trap air while removing or putting the bottle into the holder.