Tesla Model 3 Tray w/J1772 storage slot - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Tesla Model 3 Tray w/J1772 storage slot

0 downloads34 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I had a look around and saw that there were some models like this already, but I wanted to make modifications and found that editing the STL files was a nightmare due to their construction in other programs. So, I set out to make my own version of this tray. This was re-modeled from scratch in Fusion 360. I did, however, take some base measurements from the excellent work that was done by jonco223 (https://www.thingiverse.com/thing:2991851). So, I'm not sure if this is considered a remix or what. I then added a slot for the J1772 adapter and a simple wall. I was very pleasantly surprised that the first attempt at printing this piece came out well and fit the car perfectly (Thanks to jonco223's measurements). It is now in the car and being used. =).