Tesla Model 3 Tray with Integrated USB Hub + J1772 Slot - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Tesla Model 3 Tray with Integrated USB Hub + J1772 Slot

0 downloads29 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

OK, so this is a remix of my model here: https://www.thingiverse.com/thing:3876646. I've integrated a USB Hub into the tray. This essentially adds 3 more USB ports, which is perfect for me to have 2 working phone chargers (as the car comes with) but also room for my Sentry Mode/Music storage media + 2 Logitech Controllers for Tesla in-car gaming! The USB Hub to use with this model is the "USB Hub, RSHTECH 4 Port USB 3.0 Ultra Slim Aluminum Data Hub Portable USB Splitter" found here: https://www.amazon.com/gp/product/B07RM322YY/. You will also want a short male-to-female USB extension cable. You won't need more than about 10 inches (25cm), so get the shortest one you can find at least that long. I designed this model so that the above USB hub slides into an opening in the back of the tray. The source USB lead comes down out of a small opening on the bottom. The USB hub has a front-facing USB port which the normal phone charger can plug right into and the hub's source USB lead can be plugged into the car with a short USB extension. Perfect! UPDATE: I've now also included "USB Tray2.stl" which is the same model without the J1772 adapter spot. UPDATE2: I've now added "Negative Mold for Liners.stl" so you can pour urethane rubber liners for your tray.