Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Tesla_Wheel_Cap4.stl | Cover / cap | 1.4 MB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model 3 Wheel Center Cap
Shared by
3DPrintedCarPartDescription
3DMath's Wheel center cap is beautiful, especially if printed in ABS and vapor smoothed. However, if you are lazy like me and mostly look at cars from a distance, then this version might suit you better. The raised logo can be printed in an alternate colour if paused @ 21.2mm before filament change. I kept a tiny gap between the white and grey bit because I thought it looked cool. Time will tell if it is going to look awful when dirt collects there. The lug nut caps are a remix of elloial's design and can be found here: https://www.thingiverse.com/thing:4639404
Compatible Cars
Originally published on thingiverse.com by Carsten Cremer (CarstenMakerBot) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
