Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Tesla model S phone holder vent

0 downloads29 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I was sick of my vent holders not keeping a grip in my Tesla. They either kept sliding around, or came of while accelerating. I looked at some aftermarket phone holder, and I noticed they didn't grip the vent-blades but gripped on the walls of the vent. So I decided to design a similar grip, and it worked out perfectly. This grip seems to hold very well, but I will keep improving if necessary. As you can see, I simple bolted a round knob on the plate, but you can do whatever you want with it. If the print still slides around, you can use some double-sided tape or glue some rubber band in the grip. This way it won't slide around.