Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Tesla_S_X_Qi_Adapter.stl | Primary model | 83.2 KB STL | Slice file | Slice file | Slice file | Ensure the adapter is oriented to minimize supports in the slicer |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model S/X phone holder/charger vent adapter
Shared by
3DPrintedCarPartDescription
This is an adapter for fitting this clamping qi wireless phone charger on a Tesla Model S or X vent. It clamps down on the bar between the two ventilation outlets in the cockpit. The clamp that comes with the phone holder can be replaced with this one easily and it grabs on pretty hard, providing great stability. I printed it in ABS, with 20% infill, four top/bottom layers and four outline shells. I wouldn't print it in PLA because PLA will definitely warp under the temperatures in a car, come summer.
Compatible Cars
Originally published on thingiverse.com by Oliver Mandic (olivermandic) · License: CC BY-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
