Files (2)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Tesla_Cable_Organizer.stl | Printable file | 1.8 MB STL | Slice file | Slice file | Slice file | Print the main organizer body and the Tesla Wall Mount separately. |
| Tesla_Wall_Mount.stl | Mount / bracket | 882.1 KB STL | Slice file | Slice file | Slice file | Print the main organizer body and the Tesla Wall Mount separately. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Tesla Model S/X/3 Cable Organizer
Shared by
Michael ChenDescription
Do you have a Tesla Model S, X, or 3? Attach this cable organizer to the wall and keep your charging cord tidy. It has room to keep any spare cable length wrapped up, and it mounts flush to the wall with no screws showing. I printed the main organizer body with supports. The supports should be easy to remove and sand down on the back side. To mount it on the wall, print the Tesla Wall Mount.stl, find a stud, and screw two nice long screws through the holes. (Be sure to keep the curvy end on the bottom end) Then, just slide the body onto the mount from above.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
