Files (2)

Tesla_T_Logo_1.stl

STL

50.9 KB

Tesla_T_Logo_2.stl

STL

37.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Tesla_T_Logo_1.stl	Printable file	50.9 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports
Tesla_T_Logo_2.stl	Printable file	37.0 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Tesla T

0 downloads27 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Modeled up the Tesla logo for practice in F360. Version 2 has the top of the T separate from the bottom so you can see the backdrop. Version 1 is one solid piece. Enjoy!