Files (2)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Nosilec_za_polnilnik.stl | Printable file | 878.0 KB STL | Slice file | Slice file | Slice file | Ensure a secure and watertight seal around the charging cable and meter |
| Pokrov_nosilca_za_polnilnik.stl | Printable file | 875.0 KB STL | Slice file | Slice file | Slice file | Ensure a secure and watertight seal around the charging cable and meter |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Theft deterrent mount for Opel Ampera charging cable with meter
Shared by
3DPrintedCarPartDescription
I wanted to make a safe station to connect the charging cable of my Ampera to the mains socket outside my home. The safety goal was: "cable not easily removable without crowbar." I also wanted some protection from elements (it is mounted outside, but under the roof). I added a cheap energy meter to get an overview of energy used and to be able to check charger function. For standard EU in-wall receptacles with earth contact (schuko). Please be safe and install only if you have the necessary knowledge about safety of electrical installations. It should also work with other charging cables of a similar design (max. 35mm thick handle).
Compatible Cars
Originally published on thingiverse.com by Franci Kopac (fkopac) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
