Files (3)

Jeep_Tray_left_v2.stl

STL

488.4 KB

Jeep_Tray_right.stl

STL

382.8 KB

rotated_tray_joined.stl

STL

778.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Jeep_Tray_left_v2.stl	Choose left variant	488.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
Jeep_Tray_right.stl	Choose right variant	382.8 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
rotated_tray_joined.stl	Printable file	778.8 KB STL	Slice file	Slice file	Slice file	Ensure proper fit in the center console before printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

TJ Wrangler Center Console Tray

0 downloads51 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Tray for the Upper portion of the center console on a TJ wrangler. I hated how small the original tray was, and I wanted to add a Ram mount for a wireless charger. It fits fairly well, just a bit tight, though still very usable. The hole in the tray is meant for a USB cable to go through (I have one running inside the center Console to minimize wires).