Toyota Celica Supra MK2 (MA61) Grille Clip - image

Files (2)

PI3MK3M_SupraMK2_Grille_Clip.3mf

3MF

12.4 KB

SupraMk2_Grille_Clip.stl

STL

45.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 100%	100% solid	Recommendation
PI3MK3M_SupraMK2_Grille_Clip.3mf	Clip	12.4 KB 3MF	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 100–100% infill for durability.
SupraMk2_Grille_Clip.stl	Clip	45.8 KB STL	Slice file	Slice file	Slice file	Verify orientation and support needs in your slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Grilles

Toyota Celica Supra MK2 (MA61) Grille Clip

0 downloads44 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Toyota Celica Supra MK2 Grille Clip, part nr 90467-12008. Save the shipping cost and print some instead! Should work with any filament, but preferably ABS or PETG. Cut a peace of 1,75 filament and stick in the top hole with 3-4mm sticking out on each side to make the top pins. Glue or heat in place. Used settings: 0.10mm layer hight 0.40mm line with 100% infil or 99999 bottom layers 40 mm/sec print speed No support 5 lines Brim SAVE THE DRAGONS! Best regards, Robin!