Toyota Corolla 2013-2015 Rear Speaker Adapter 6x9 - image

Files (1)

fo2n1XnBBRX.stl

STL

346.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 40%	100% solid	Recommendation
fo2n1XnBBRX.stl	Primary model	346.9 KB STL	Slice file	Slice file	Slice file	Use a 0.2mm layer height for optimal print quality

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Toyota Corolla 2013-2015 Rear Speaker Adapter 6x9

0 downloads64 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

%40 infill (up to %60 if you want, we really need structural integrity in this model) 0.2mm layer height no support (obviously:) ) Tested with Toyota Corolla 2013 and JBL Stage 3 9637 speaker. (It's compatible with Toyota Corolla 2013, 2014, 2015 Rear Speakers) This adapter isn't sold anymore in my country. That's why I came up designing it and printing my own. I shared it, so you guys can print it too without paying around $14/pair on amazon.