Toyota Corolla GPS / Phone mount - image

Files (1)

Corolla_Phone_Holder.stl

STL

301.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Corolla_Phone_Holder.stl	Mount / bracket	301.7 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Toyota Corolla GPS / Phone mount

0 downloads49 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Made this to get the GPS off the window. The dash bezel easily pulls off and the blocking plug pulls out from behind. The ball mount is 5/8" (16mm) but can be changed to suit your device. Complex angles of the plug may require some sanding to fit. PETG used.