Toyota Fender Liner Screw Grommet - image

Files (2)

Toyota_Fender_Liner_Screw_Grommet.stl

STL

68.8 KB

Toyota_Fender_Liner_Screw_Grommet_with_Slits.stl

STL

48.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Toyota_Fender_Liner_Screw_Grommet.stl	Printable file	68.8 KB STL	Slice file	Slice file	Slice file	Ensure the screw hole is oriented to minimize support material
Toyota_Fender_Liner_Screw_Grommet_with_Slits.stl	Printable file	48.6 KB STL	Slice file	Slice file	Slice file	Ensure the screw hole is oriented to minimize support material

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Fenders

Toyota Fender Liner Screw Grommet

0 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A replacement for Toyota's inner-fender liner screw grommets. 2 different models, one with slits for flexibility. Screw hole is snug so I recommend using smaller screws with a washer.