Toyota Highlander 2018 center console tray - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Toyota Highlander 2018 center console tray

0 downloads42 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

The tray inside the center console of our 2018 Toyota Highlander was a bit massive and prevented easy access to items underneath. No idea if this works on other year models, but assembled it is 217mm wide. Can work well as a single tray or print two and slide apart. My printer wasn't large enough to do it all in one go so spit the model a bit (200mmx200mm print bed). Print out 4 of the pins. Secure each wing piece with two pins, diagonal first and after sliding into place, secure with a pin straight in. The original tray has sticky felt pads on the sides to lessen vibration. They peel off easily and can be reused as shown. I used PETG mainly because I didn't have any black ABS.