Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Toyota Key Case - Remote Button

0 downloads51 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Our Toyota Corolla was supplied with 2 remote control keys. After both broke open - due to faulty (weak) design, we purchased a replacement at horrendous cost - Toyota do not supply the plastic moldings only. When the replacement broke - I modelled and printed a replacement - there are 2 parts, the Upper case accepts the remote control assembly, the lower case has a hole to fit the key into, then the assembly is held together with 4 CSK XR Screws PZK35X10. The 3D printed part is far stronger than the original casing.