Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Toyota Land Cruiser Emblem

0 downloads41 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

A sloppy attempt at one of the emblems on the early model FJ40 Land Cruisers. I traced a photo of the emblem in inkscape, exported layers to DXFs and imported them into OpenSCAD to union/difference the appropriate layers. Later models of the FJ40 emblem changed slightly but this one matches my 1966 model year. I'll try printing it tonight and post results.