Toyota Landcruiser centre console - image

Files (3)

Centre_console_front_section.stl

STL

3.0 MB

Centre_console_rear_section_R1.stl

STL

5.1 MB

Centre_console_Tray_insert.stl

STL

2.4 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
Centre_console_front_section.stl	Printable file	3.0 MB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to avoid warping
Centre_console_rear_section_R1.stl	Printable file	5.1 MB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to avoid warping
Centre_console_Tray_insert.stl	Printable file	2.4 MB STL	Slice file	Slice file	Slice file	Ensure proper adhesion to the print bed to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Toyota Landcruiser centre console

0 downloads57 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A centre console to suit the Toyota Landcruiser VDJ79 series utes. Printed in 3 parts. The front section has a pen/pencil cavity, drink holder, glasses/specticles cavity, a dual usb charge socket, a business card dispenser. The rear section has a mobile phone cavity, a lift out utilities tray, and a hidden storage cavity. The two main sections are joined together via a dovetail joint. It is designed to go between the existing console and the existing drink holder. No modifications needed to the vehicle. Designed to be printed with support, PETG is probably the most suitable material. PLA would print well but the heat inside a closed car on a hot day may distort the console. If you are interested in changing this to suit yourself, here is the link to the Onshape drawing. https://cad.onshape.com/documents/ab5ac5ede95d92ea97a814d8/w/7de69a3cc6072525ca3e054b/e/c0584aa3456e3322e7f8933a 2 February, 2017. Added a revised rear section which increases the clearance around the hand brake mounting bolt. I have also included a pdf drawing with dimensions. These are large prints and take a long time as shown in the photos.