Toyota RAV4 Hinge Armrest Console Part - Larger Piece - image

Files (2)

Car_model.obj

OBJ

119.3 KB

Car_model_fixed.stl

STL

83.8 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Car_model.obj	Printable file	119.3 KB OBJ	Slice file	Slice file	Slice file	Print the fixed version (Car_model_fixed.stl) for better results
Car_model_fixed.stl	Printable file	83.8 KB STL	Slice file	Slice file	Slice file	Print the fixed version (Car_model_fixed.stl) for better results

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Toyota RAV4 Hinge Armrest Console Part - Larger Piece

0 downloads60 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a hinge part for the RAV4. I designed this part in google sketchup and finding out that the original part would cost me $50. Printed first go no problems at all. I printed it vertically standing up, because there is an error in the model that does not allow it to be printed vertically. Supports required. Please enjoy and leave positive comments! Thanks **Please use the fixed version to print. It will allow you to print the piece horizontally. Supports still required. When printed vertically, the arms were very weak and prone to snapping. If printed horizontally, it is much stronger.