Toyota Rav4 Samsung S7 Magnetic Charging Port - image

Files (1)

Rav4PhoneInsert_v28.stl

STL

2.0 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Rav4PhoneInsert_v28.stl	Primary model	2.0 MB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports in the slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Toyota Rav4 Samsung S7 Magnetic Charging Port

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

My friend had a magnetic wired charger set up in her car but wanted a place to just drop the phone and go. I set this up (by request) to "lock" the phone in behind the shifter, so when you're in drive you cannot access the phone to prevent texting while driving. Note this uses the older style magnetic chargers and would need a small modification to work with more current adapters. If there is interest I might make a modern one or a QI-based one.