Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Toyota Tacoma Brake Line Spacers (for bolt-on sliders)
Shared by
3DPrintedCarPartDescription
Adding bolt-on sliders to a 2015 Toyota Tacoma introduces some bolts into the frame that interfere with the OEM routing of the brake lines. Rather than bending the lines slightly, I designed these brackets to space them out away from the frame enough to clear the new bolts. There are three files here:...ext is a "drop-in" replacement for the front-most OEM plastic bracket...ext_bolt is a new bracket that fits onto the thread of a 1/2"x1.5" bolt...relo_bracket relocates the rear-most OEM plastic bracket a bit down and away from the truck frame (this particular bracket is currently a work in progress!) This was designed for a 2015 Toyota Tacoma Double Cab Short Bed specifically, but may also fit other variations of 2nd or 3rd generation models.
Compatible Cars
Originally published on thingiverse.com by Joel Gomez (blamejoel) · License: All Rights Reserved
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
