Files (1)

toy-cap.stl

STL

514.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
toy-cap.stl	Cover / cap	514.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Toyota valve stem cap

0 downloads24 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I needed some valve stem caps for my truck. I looked around here and nothing really jumped out at me so I made my own. I did copy the styles of others here, there are no internal threads. It will cut threads the first time you thread it on to the valve stem. I added a Toyota logo to the top of the cap. There are 4 of them sitting on a 0.50 brim for easy printing. Trim apart post print with scissors. I paused my print when it got to the logo and I pulled out the black and jammed in the blue and hit resume. Printed in ABS.2 layer 50% infill.