Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| VVT-i_Badge_i_insert.stl | Accessory piece | 10.2 KB STL | Slice file | Slice file | Slice file | Small functional file: print slowly; consider 80–100% infill for durability. |
| VVT-i_Badge_main.stl | Printable file | 64.9 KB STL | Slice file | Slice file | Slice file | Ensure proper adhesion to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Toyota VVT-i Badge
Shared by
3DPrintedCarPartDescription
Friend of mine lost his VVT-i badge he bought on the rear hatch of his Scion Xbn when ti had to get repainted. He mentioned he wanted to order a new one so I figured I could print one. I could not find a model for one that matched what he had so I designed it. Printed in PETG as I did not think PLA would stand up to being out in the elements.
Compatible Cars
Originally published on thingiverse.com by Anthony Bariana (Edgemaster1) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
