Files (3)

AIR.STL

STL

192.2 KB

Hotcold.STL

STL

179.4 KB

VENT.STL

STL

180.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
AIR.STL	Printable file	192.2 KB STL	Slice file	Slice file	Slice file	Print with a brim for stability
Hotcold.STL	Printable file	179.4 KB STL	Slice file	Slice file	Slice file	Print with a brim for stability
VENT.STL	Printable file	180.5 KB STL	Slice file	Slice file	Slice file	Print with a brim for stability

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Triumph TR7/TR8 Heater controls

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

TR7 heater control knob Print the hot/cold one twice paint red/blue arrows on one and white on the other Updated as I copied from a broken one and it didn't fit.