Trunk opening button Renault Scénic (1st generation) - image

Files (1)

Trunk.stl

STL

941.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Trunk.stl	Primary model	941.4 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Trunk opening button Renault Scénic (1st generation)

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Some time ago, the button of my car's trunk came out. The part that pushes the opening mechanism and also holds the button in place was worn and didn't do its job anymore. After submitting to fate and not using the trunk anymore for some time, I decided to design a replacement part. Since it happened to me, I suppose it could happen to more people with this car. So, just in case you have a first generation Renault Scénic (1999-2003) and this problem occurs- now you have a solution.;) If you want to see what else I do, you can check out my website: https://www.fromheadtohand.com