Twingo bouton de chauffage / heating button - image

Files (2)

bouton.STL

STL

11.9 MB

support_bouton.STL

STL

2.8 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
bouton.STL	Printable file	11.9 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping
support_bouton.STL	Printable file	2.8 MB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Twingo bouton de chauffage / heating button

0 downloads51 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Après avoir récupéré un bouton sur Thingiverse qui ne se montais pas correctement sur la Twingo, j'ai décidé d'en faire un moi même. Pour facilité l'impression et la fixation sur la voiture je l'ai imprimé en deux pièces vissé avec deux vis a bois de 3x10. After recovering a button on Thingiverse which did not fit correctly on the Twingo, I decided to make one myself. For ease of printing and fixing on the car I printed it in two pieces screwed with two wood screws of 3x10.