Files (2)

case_mounting_back_side.STL

STL

13.2 MB

case_mounting_connector_side.STL

STL

1.1 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
case_mounting_back_side.STL	Mount / bracket	13.2 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing
case_mounting_connector_side.STL	Mount / bracket	1.1 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

UA4C case holder miata 94-97

0 downloads44 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

A Hammond case holder adapter to replace the stock ECU with a Speeduino. This uses the stock brackets you just have to make 2 new holes for the side mounting point. It fits the 1994 to 1997 Mazda Miata with the ECU behind the passenger seat. Use small wood screws for mounting int the plastic.