Files (1)

PlateSpacer.stl

STL

11.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
PlateSpacer.stl	Primary model	11.0 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Front Bumper

US License Plate Spacer

0 downloads198 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The license plate holder on my 2012 GMC Sierra was recessed into the bumper which made it hard to mount my fire department tag behind the plate, so I made this spacer to push the license plate forward and be able to mount the tag properly. The spacer is 5mm thick but you can scale it in the slicer.