USB Port for Empty Switch Port - Toyota Highlander 2013 preview

Files (1)

USB_Port_A.stl

STL

1014.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ABS / ASA 20%	ABS / ASA 18%	100% solid	Recommendation
USB_Port_A.stl	Primary model	1014.9 KB STL	Slice file	Slice file	Slice file	Print in two pieces to help lock the USB port into place

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

USB Port for Empty Switch Port - Toyota Highlander 2013

0 downloads47 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

ABS or ASA for durability in vehicle conditions

Print time

Slice to calculate

Filament

Slice to calculate

Supports

supports likely, verify in slicer

Infill

15-20% infill for strength and minimal weight

Difficulty

Not rated — inspect geometry

Vehicle heat

Higher-heat material; verify location and load

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

A friend of mine wanted me to make this for his 2013 Toyota Highlander, so this should work for similar highlanders and models in general. Printed in two pieces to help lock the USB port into place. I tried to make it parametric but I'm not the greatest at that lol. Printed on a Qidi X-Max 2 Print Settings Printer Brand: QIDI Rafts: No Supports: Yes Resolution:.2 Infill: 15% Filament: GizmoDorks ABS Black Notes: I would recommend printing this in ABS, ASA, or something with a similar glass transition point, as it's going into a vehicle Category: Automotive.