Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Astra_J_Cupholder_attachment3.stl | Mount / bracket | 243.2 KB STL | Slice file | Slice file | Slice file | Ensure a strong adhesion to the print bed to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Vauxhall (Opel) Astra "J" cupholder attachment
Shared by
3DPrintedCarPartDescription
I am new to 3D printing but decided to put my new machine to good use, I had an after market arm rest that I fitted to my 2014 Vauxhall Astra "J" this was designed to fit in the rear cup holder, I could never get it to fit, so I measured the aperture and designed a holder that would fit the hole and allow me to bolt the armrest to this holder, I then was able to use "No Nails" to stick the whole assembly in.
Compatible Cars
Originally published on thingiverse.com by Chris Reeves (ChrisReeves) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
