Files (4)

Body1.3mf

3MF

6.0 KB

Body1.stl

STL

19.0 KB

Body3.3mf

3MF

4.8 KB

Body3.stl

STL

15.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Body1.3mf	Accessory piece	6.0 KB 3MF	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Body1.stl	Accessory piece	19.0 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Body3.3mf	Accessory piece	4.8 KB 3MF	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.
Body3.stl	Accessory piece	15.1 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Panels

Volkswagen T4 Door panel clip

0 downloads46 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Clips used to hold the door cards in place. Print both pieces and assemble with glue, a gap of 0.1mm has already been applied around the mating surfaces to account for printer tolerances.