Volkswagen VW Polo 6 AW Can Cup Holder Adapter - image

Files (1)

VW_Getrankehalter-4.stl

STL

239.0 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

18g

Based on 25% main infill across listed model files

Material cost

$0.42

Filament only at roughly $24/kg PETG / ASA

Print time

30m–50m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
VW_Getrankehalter-4.stl	Primary model	239.0 KB STL	16g $0.39	18g $0.42	39g $0.93	Check the final orientation and support settings in your slicer before printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Cup Holders

Volkswagen VW Polo 6 AW Can Cup Holder Adapter

0 downloads54 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

It's for the cupholder. So cans can't fall over and fit perfectly. Catalog note: Volkswagen VW Polo 6 AW Can Cup Holder Adapter is a 3D-printable car-part listing indexed for classified fitment Volkswagen Polo. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.