Volume/Power Knob fix for BMW vehicles - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Volume/Power Knob fix for BMW vehicles

0 downloads49 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Do you have an CD53 BMW with a radio that has a broken volume knob? This is a part to fix that. The CD53 radio has a volume knob that you push to power on/off the radio. It seems common for this to get broken with too hard a push and you will no longer be able to turn the radio on or off. The cause is the white plastic support for the knob encoder that breaks where the knob back screws in. The part is a duplicate of the factory one with stronger bosses where the screws thread into the plastic. You will need to take the radio almost completely apart to install this part.