Files (1)

Fantabulous_Jofo_3.stl

STL

17.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ASA / ABS 20%	ASA / ABS 20%	100% solid	Recommendation
Fantabulous_Jofo_3.stl	Primary model	17.6 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Volvo 240 rear seat belt cover

0 downloads40 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I designed this little cover to replace the ones that had rotted from the sun. They are quite a bit smaller than the original and are a neat fit over the seat belt mechanism and fit comfortably on a 200 x 200 print bed. Some of the cars metal is visible behind the cover and i just cut some carpet to fill these gaps. Lay flat and print upside down to avoid support 20% fill is fine. Scale to suit. Recommend ABS or better for sun heat resistance. Mirror image for left side.

Compatible Cars

Volvo (all models)

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by paul baxter (whitecatimports) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

BMW

3.1K

License: CC BY

View & download STL files