Files (2)

VolvoRTI_Navigation.stl

STL

7.7 KB

VolvoRTI_Navigation_Drive5.stl

STL

20.4 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

2 model files

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
VolvoRTI_Navigation.stl	Accessory piece	7.7 KB STL	23g $0.55	25g $0.60	55g $1.32	Small functional file: print slowly; consider 80–100% infill for durability.
VolvoRTI_Navigation_Drive5.stl	Accessory piece	20.4 KB STL	23g $0.55	25g $0.60	55g $1.32	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Volvo S60 V70 R P2 RTI Retrofit

0 downloads165 views0 likes

Shared by

Michael Chen

Verified

Description

I retrofitted a GARMIN navigation into my Volvo S60R from 2003. baseplate for your own navigation project baseplate for GARMIN Drive 5 Plus Way to hot on the dashboard to use PLA.