Files (1)
Based on 50% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 50% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Voronoi_Shift_Knob.stl | Primary model | 8.2 MB STL | 71g $1.71 | 108g $2.60 | 170g $4.07 | Apply a protective coating to enhance durability |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Voronoi Shift Knob (threaded for VW - M12x1.5)
Shared by
3DPrintedCarPartDescription
So I've been playing around with making custom shift knobs to print that would look good in hybrid wood filaments. I was a bit apprehensive about using this in a car since PLA is known to soften, but at 50% infill and with a nice thick coating of stain/lacquer on top it seemed to hold up this summer just fine. I also have a plain version without the voronoi style pattern.
Compatible Cars
Originally published on thingiverse.com by Benjamin Williams (maketoast) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
