Files (1)

TK_Knob_Bus_V1_v3.stl

STL

2.7 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
TK_Knob_Bus_V1_v3.stl	Primary model	2.7 MB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent shifting during printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

VW Bus Shift Knob

0 downloads38 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is specifically sized for a Scat Drag Shifter for my Bay Window VW Bus. The bore is for an M9 and I tapped it out to M10x1.25 to fit my shifter. IIRC the Stock shifter is an M12 so it could be further widened. Has a nice heft to it and raises up the shifter location to a more comfortable position.