VW Crafter/Merzedes Sprinter/Dodge Sprinter/Hyundai H35 - Rear Emblems - image

Files (5)

Cheese_emblem.stl

STL

478.3 KB

Cannabis_emblem.stl

STL

480.8 KB

hen_emblem.stl

STL

481.5 KB

Batman.stl

STL

653.3 KB

Crafter_Emblem_v3.step

STEP

112.6 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

5 model files

Typical selected file

26g

Based on 25% main infill for the largest likely-needed model file

Material cost

$0.61

Filament only at roughly $24/kg PETG / ASA

Print time

44m–1.2h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Cheese_emblem.stl	Printable file	478.3 KB STL	21g $0.50	23g $0.54	50g $1.19	Scale the model down to 10% due to a bug in the STL files
Cannabis_emblem.stl	Printable file	480.8 KB STL	21g $0.50	23g $0.54	50g $1.19	Scale the model down to 10% due to a bug in the STL files
hen_emblem.stl	Printable file	481.5 KB STL	21g $0.50	23g $0.54	50g $1.19	Scale the model down to 10% due to a bug in the STL files
Batman.stl	Printable file	653.3 KB STL	23g $0.56	26g $0.61	56g $1.34	Scale the model down to 10% due to a bug in the STL files
Crafter_Emblem_v3.step	Printable file	112.6 KB STEP	13g $0.30	14g $0.33	30g $0.73	Scale the model down to 10% due to a bug in the STL files

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

VW Crafter/Merzedes Sprinter/Dodge Sprinter/Hyundai H35 - Rear Emblems

1 downloads261 views0 likes

Shared by

Alfred

Verified

Description

This is a replacement for the Rear Emblem. I've added different designs. A hen, batman, cannabis and a cheese. We have a farm and are selling eggs and cheese. Print with supports. mount it like the original emblem. There is a bug in the STL files. Scale it down to 10%. Mybe the old AutoCAD I've originally used to design this caused this. ###Tip for Prusa i3 users: Use Prusa Colorprint to add manual filament changes without the MMU (Multi Material Upgrade).