Files (1)

GolfKnobv4.stl

STL

5.8 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
GolfKnobv4.stl	Primary model	5.8 MB STL	Slice file	Slice file	Slice file	Verify orientation and supports in your slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

VW front seat knob

0 downloads33 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

My seat knob was broken, even a part of the metal lever was broken. So I had to extend the length of the original. I also made the internals so it prints without supports. With the extra length I thickened it up a bit for more stability. It fouls a little bit so the lever does not spring down naturally, but with the broken metal lever that was inevitable. I also printed it in glow in the dark to help find the knob in the dark sometimes.