Files (1)

TDI_split.stl

STL

659.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
TDI_split.stl	Primary model	659.0 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

VW Golf IV TDI front grill badge logo split

0 downloads62 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Original see: https://www.thingiverse.com/thing:2598399 I have only separated the letters from the bar and enlarged the holes for mounting to 3mm. This allows the printing of the Letters and the bar in different colors and more flexible mounting on the grill. The parts must then be glued together.