VW Golf MK7 Rear Trunk Cargo Hook - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 50%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

VW Golf MK7 Rear Trunk Cargo Hook

0 downloads54 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Cargo Hooks for the rear trunk of an Volkswagen Golf MK7. Because the original "cargo hook" didn't secure literally anything, I made my own cargo hooks. Now your groceries wouldn't fly all over the cargo area. There are two versions marked on the backside with "H" or "F". Hook type H is (only) for the mounting position near the taillights and hook type F ismeant to be attached to the mounting position near the backseat. Type F will fit both monting positions. I used the same clip design like the original part and it worked well. You may have to play a little bit with the amount of infill an infill type. Printing instructions: Material: PETG (PLA will get soft on summer) Infill: 50% Number of perimeter: 2 Layer hight: 0.2 Orientation on the printbed: lying on one side (to ensure the best layer strenght possible) Support: Yes, approx. 50% Print bed adhesion: Use brim I'm looking forward to see some pictures of your own prints.