← Back to Browse Parts
VW MK7 Golf-R Blackvue 750 Dashcam mount - image

Files (1)

Dashcam_Mount_v32.stl
STL
162.3 KB
Print guidance estimate
Estimated from part metadata
Print cost & setup estimate
Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.
1 model file
Recommended kit
15g

Based on 25% main infill across listed model files

Material cost
$0.37

Filament only at roughly $24/kg PETG / ASA

Print time
26m–44m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL fileRoleSource sizePETG / ASA 20%PETG / ASA 25%100% solidRecommendation
Dashcam_Mount_v32.stlMount / bracket162.3 KB STL
14g
$0.34
15g
$0.37
34g
$0.81
Ensure the print bed is level and clean for proper adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mirror Covers

VW MK7 Golf-R Blackvue 750 Dashcam mount

0 downloads44 views0 likes
3DPrintedCarPart logo
Verified

Description

This bracket mounts to the bottom of the rear view mirror cover with double-sided tape and M3 flat head screws and nuts.

Compatible Cars

Published Jun 27, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Dumbcomputers (dumbcomputers) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…
Sign in to share fitment proof, installed photos, and material notes.
Comments (0)
Part lists
Save this part to named public or private collections. Public lists can be shown on this part page.