VW New Beetle Spare Tire Screw Knob - image

Files (2)

Beetle_Spare_Screw.STL

STL

5.9 MB

Beetle_Spare_Screw_Wider.STL

STL

5.9 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Beetle_Spare_Screw.STL	Printable file	5.9 MB STL	Slice file	Slice file	Slice file	Ensure the bolt is properly secured in the printed knob using a vise.
Beetle_Spare_Screw_Wider.STL	Printable file	5.9 MB STL	Slice file	Slice file	Slice file	Ensure the bolt is properly secured in the printed knob using a vise.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

VW New Beetle Spare Tire Screw Knob

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Note: the original file will need to have the bolt pressed in with a vise. The wider one should work as described below. This is the knob that holds down the spare tire in a new beetle. I'm not sure about the years this will work on, but mine's an '04, so probably at least '98 to '04? The knob has a tapered wall before the hole for the bolt's head to retain the bolt. I made this a remix of pavel's knob because they were here first. Had I known their model was online, I probably would have just printed theirs. I like mine better simply because I think it matches the original better and because it's my own. However if this model doesn't work, check out theirs and see if it fits.