VW T4 Smartphone Holder for Dashboard 1996-1998 - image

Files (5)

Part_1.1_-_Dashboard_Cover_Hooks.stl

STL

151.4 KB

Part_1_-_Dashboard_Cover.stl

STL

150.1 KB

Part_2_-_Connector_with_holes.stl

STL

32.0 KB

Part_3_-_Bracket_base_plate.stl

STL

91.1 KB

Part_4_-_Smartphone_holder.stl

STL

282.6 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

5 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Part_1.1_-_Dashboard_Cover_Hooks.stl	Cover / cap	151.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer, likely needed for Part 4.
Part_1_-_Dashboard_Cover.stl	Cover / cap	150.1 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer, likely needed for Part 4.
Part_2_-_Connector_with_holes.stl	Printable file	32.0 KB STL	Slice file	Slice file	Slice file	Use PETG or ASA for parts that will be exposed to heat and UV.
Part_3_-_Bracket_base_plate.stl	Mount / bracket	91.1 KB STL	Slice file	Slice file	Slice file	Use PETG or ASA for parts that will be exposed to heat and UV.
Part_4_-_Smartphone_holder.stl	Mount / bracket	282.6 KB STL	Slice file	Slice file	Slice file	Use PETG or ASA for parts that will be exposed to heat and UV.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

VW T4 Smartphone Holder for Dashboard 1996-1998

0 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Hi! I needed a decent phone holder for my Volkswagen T4 (1997) so I designed / remixed one. Fits a Samsung S10 / S9 perfectly. It is very easy to print. The holder consists of five small parts. The actual holder for the phone can be printed out of TPU, so the phone with a case will fit in better. Part 4 is simply glued to part 3. You need just 3x M4x12mm screws (10mm-15mm will fit). The holes have no threads. Just screw in the M4 screw with some pressure to create a thread. Quantity Prints: 1x Part 1 - Dashboard Cover 2x Part 1.1 - Dashboard Cover Hooks 1x Part 2 - Connector with holes 1x Part 3 - Bracket base plate 1x Part 4 - Smartphone holder (TPU) I printed all parts (except Part 4) from PETG due to heat and UV exposure. ABS would be even better. Maybe PLA+ will do as well. PETG 0.2 Layer 25% Infill Support only for Part 4 I printed all Parts in 4~ Hours with my Flashforge Creator Pro.