VW T5 California camping controller knob - image

Files (1)

botao-california.stl

STL

211.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
botao-california.stl	Primary model	211.4 KB STL	Slice file	Slice file	Slice file	Ensure a stable printing surface to avoid warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

VW T5 California camping controller knob

0 downloads42 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The Volkswagen California is equipped with a camping controller responsible for every camping related electric equipment on the van: fridge, heating, pop-up roof, etc. It tends to break quite often, and a new controller is not cheap. I decided to design and print my own button, you may have to fine tune the design to fit your printer.